Pantalla LCD COG 128x64
Modelo Nº WO12864D3
►Pantalla LCD 128x64 puntos
►Pantalla Grafica
►Controlador integrado (ST7565P o equivalente)
►Fuente de alimentación de 3,3V
►1/64 duty cycle
►Interfaz : 6800/8080/SPI
DIBUJO
ESPECIFICACIONES
Función interfaz Pin
| Pin No. | Símbolo | Función |
|---|---|---|
| 1 | /CS1 | The chip select signal |
| 2 | /RES | Controller reset signal, Active Low |
| 3 | A0 | Data/ Instruction select signal |
| 4 | /WR(R/W) | 8080 family: Write signal, 6800 family: Read/Write signal |
| 5 | /RD(E) | 8080 family: Read signal, 6800 family: Enable clock |
| 6~13 | D0~D7 | Data bus line |
| 14 | VDD | Power supply for logic |
| 15 | VSS | Ground |
| 16 | Vout | Positive Voltage output |
| 17 | CAP5+ | DC/DC voltage converter |
| 18 | CAP3+ | DC/DC voltage converter. |
| 19 | CAP1- | DC/DC voltage converter. |
| 20 | CAP1+ | #N/A |
| 21 | CAP2+ | DC/DC voltage converter. |
| 22 | CAP2- | DC/DC voltage converter. |
| 23 | CAP4+ | DC/DC voltage converter. |
| 24 | VRS | This is the internal-output VREG power supply for the LCD power supply voltage regulator. |
| 25~29 | V4~V0 | Bias voltage levels for LCD driving |
| 30 | VR | LCD Contrast Adjustment when IRS = “L” |
| 31 | C86 | Interface selection 6800/8080 |
| 32 | P/S | Selects the interface type: Serial or Parallel. |
| 33 | /HPM | Control power supply for LCD “H”: Normal mode, “L”: High power mode |
| 34 | IRS | Selects the resistors for the V0 voltage level adjustment |
Datos mecánicos
| Elemento | Valor estándar | Unidad |
|---|---|---|
| Dimensión del módulo | 80.0 × 54.0 | mm |
| Área de visualización | 70.7 × 38.8 | mm |
| Distancia entre puntos | 0.52 × 0.52 | mm |
| Tamaño del punto | 0.48 × 0.48 | mm |
Características electrónicas
| Elemento | Símbolo | Valor estándar Valor típico |
Unidad |
|---|---|---|---|
| Input Voltage | VDD | 3.0 | V |
| Tensión de conducción LCD recomendada para temp. normal Módulo versión @25°C | Vo-Vss | 10.0 | V |
Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd
