N° de modèle WO24064B
►Afficheur COG
►Afficheur graphique
►240 x 64 points incluant le curseur
►Contrôleur intégré ST7586S
►Alimentation 3.3V
►Taux de rafraichissement 1/64 duty cycle
►Interface : 6800/8080/SPI
DESSIN
SPÉCIFICATIONS
Fonction PIN sur l'interface
| Pin No. | Symbole | Description |
|---|---|---|
| 1 | VG | VG is the power of SEG-drivers. |
| 2 | XV0 | Negative operating voltage of COM-drivers. |
| 3 | V0 | Positive operating voltage for Vop generator. |
| 4 | VM | VM is the non-select voltage level of COM-drivers. |
| 5 | VDDA | Analog power for internal booster. |
| 6 | VSS | Ground |
| 7 | VD1 | VD1 is the power source of digital circuits. |
| 8 | VDDI | Power of interface I/O circuit. |
| 9 | CSB | Chip select input pins |
| 10 | IF3 | These pins select interface operation mode. "110" : 80 series。 "100" : 68 series。 "011" : SPI-4 。"010" : SPI-3 |
| 11 | IF2 | |
| 12 | IF1 | |
| 13 | RSTB | Controller reset signal, Active Low |
| 14 | /RD(E) | 8080 family: Read signal, 6800 family: Enable clock |
| 15~22 | D7~Do | Data bus line |
| 23 | NC | No connection |
| 24 | /WR(R/W) | 8080 family: Write signal, 6800 family: Read/Write signal |
| 25 | A0(SCL) | Data/ Instruction select signal / In serial mode used as SCL (serial-clock) |
| 26 | VSS | Ground |
Données mécaniques
| Article | Valeur standard | Unité |
|---|---|---|
| Dimensions du module | 142.5 × 51.7 | mm |
| Zone d'affichage | 129.0 × 37.6 | mm |
| Trou de montage | 142.5 × 44.7 | mm |
| Pas des points | 0.53 × 0.53 | mm |
| Taille des points | 0.50 × 0.50 | mm |
Caractéristiques électroniques
| Article | Symbole | Valeur standard typ. |
Unité |
|---|---|---|---|
| Input Voltage | VDD | 3.3 | V |
| Commande LCD recommandée Tension pour température normale Module version @ 25°C |
Vo-Vss | 10.0 | V |
Search Keyword: 240x64 lcd, 240 x 64 lcd, lcd 240x64, lcd 240 x 64
