مدل شماره WF101JTYAHLNN0
◄سایز: 10.1 اینچ
◄وضوح: 1024×600 نقطه
◄جهت دید: IPS
◄رابط: LVDS
◄IC درایور : EK79001HN + EK73215BCGA
◄کنترل بورد: نیست
◄روشنایی: 500(cd/m2)
◄سوراخ فریم: نیست
◄صفحه لمسی: نیست
طراحی
مشخصات
عملکرد پین رابط
| Pin No. | نماد | عملکرد |
|---|---|---|
| 1 | VCOM | Common voltage |
| 2 | VDD | Digital power |
| 3 | VDD | Digital power |
| 4 | NC | Not connect |
| 5 | Reset | Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ，C=1μF) |
| 6 | STBYB | Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z |
| 7 | GND | Digital ground |
| 8 | RXIN0- | Negative LVDS differential data inputs |
| 9 | RXIN0+ | Positive LVDS differential data inputs |
| 10 | GND | Digital ground |
| 11 | RXIN1- | Negative LVDS differential data inputs |
| 12 | RXIN1+ | Positive LVDS differential data inputs |
| 13 | GND | Digital ground |
| 14 | RXIN2- | Negative LVDS differential data inputs |
| 15 | RXIN2+ | Positive LVDS differential data inputs |
| 16 | GND | Digital ground |
| 17 | RXCLKN- | Negative LVDS differential clock inputs |
| 18 | RXCLKN+ | Positive LVDS differential clock inputs |
| 19 | GND | Digital ground |
| 20 | RXIN3- | Negative LVDS differential data inputs |
| 21 | RXIN3+ | Positive LVDS differential data inputs |
| 22 | GND | Digital ground |
| 23 | NC | Not connect |
| 24 | NC | Not connect |
| 25 | GND | Digital ground |
| 26 | NC | Not connect |
| 27 | NC | Not connect |
| 28 | SELB | 6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit |
| 29 | AVDD | Analog power |
| 30 | GND | Digital ground |
| 31 | LED- | LED Cathode |
| 32 | LED- | LED Cathode |
| 33 | L/R | Left or right display control |
| 34 | U/D | Up / down display control |
| 35 | VGL | Negative power for TFT |
| 36 | NC | Not connect |
| 37 | NC | Not connect |
| 38 | VGH | Positive power for TFT |
| 39 | LED+ | LED Anode |
| 40 | LED+ | LED Anode |
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.
مشخصات عمومی
| مورد | ابعاد | واحد |
|---|---|---|
| قطری | 10.1 | اینچ |
| وضوح | 1024 RGB × 600 | نقطه های |
| ابعاد ماژول | 235(W) × 143(H) × 5.05(D) | mm |
| ناحیه فعال | 222.72 (H) × 125.28(V) | mm |
| درجه نقطه | 0.2175(W) × 0.2088(H) | mm |
| حالت رنگ | TFT, سیاه, انتقالدهنده | |
| رابط | LVDS | |
| IC درایور | EK79001HN + EK73215BCGA یا معادل | |
| جهت دید | 85/85/85/85 | |
| نسبت تصویر | 16:9 | |
| نوع نور پسزمینه | LED, سفید | |
| صفحه لمسی | بدون پنل لمسی (صفحه لمسی) | |
| سطح | ضد تابش خیرهکننده | |
بیشینه مقادیر مجاز مطلق
| مورد | نماد | مقدار حداقل | مقدار معمول | مقدار حداکثر | واحد |
|---|---|---|---|---|---|
| دمای عملیاتی | TOP | -20 | － | +70 | ℃ |
| دمای بستهبندی | TST | -30 | － | +80 | ℃ |
مشخصات الکترونیکی
Typical Operation Conditions (At Ta = 25 °C,)
| مورد | نماد | مقدار حداقل | مقدار معمول | مقدار حداکثر | واحد |
|---|---|---|---|---|---|
| Digital Power Supply Voltage For LCD | VDD | 3 | 3.3 | 3.6 | V |
| Analog Power Supply Voltage | AVDD | 9.89 | 10.2 | 10.5 | V |
| Gate On Power Supply Voltage | VGH | 19.4 | 20.0 | 20.6 | V |
| Gate Off Power Supply Voltage | VGL | -10.3 | -10.0 | -9.7 | V |
| Common Power Supply Voltage | VCOM | 4.0 | 4.3 | 4.6 | V |
| Input logic high voltage | VIH | 0.7 VDD | - | VDD | V |
| Input logic low voltage | VIL | 0 | - | 0.3 VDD | V |
