Model No. WO24064A1
►LCD COG
►LCD Gráfico
►240 x 64 pontos inclui cursor
►Controlador ST7565P integrado
►Alimentação 3,3V
►Interface : 6800/8080/SPI
DRAWING
SPECIFICATIONS
Interface Pin Function
| Pin No. | Symbol | Description |
|---|---|---|
| 1 | NC | No connection |
| 2 | FR | Scan start-up signal |
| 3 | CL | External clock 2KHZ |
| 4 | /DOF | This is the LCD blanking control terminal. |
| 5 | /CS1 | The chip select signal |
| 6 | CS2 | The chip select signal |
| 7 | /RES | Controller reset signal, Active Low |
| 8 | A0 | Data/ Instruction select signal |
| 9 | /WR | Data write. Write data into LCD Controller |
| 10 | /RD | Data read. Read data from LCD Controller |
| 11~18 | DB0~DB7 | Data bus line |
| 19 | VDD | Power supply for logic |
| 20 | VSS | Ground |
| 21 | Vout | Positive Voltage output |
| 22 | C3+ | DC/DC voltage converter. |
| 23 | C1- | DC/DC voltage converter. |
| 24 | C1+ | DC/DC voltage converter. |
| 25 | C2+ | DC/DC voltage converter. |
| 26 | C2- | DC/DC voltage converter. |
| 27~31 | V4~V0 | Bias voltage levels for LCD driving |
| 32 | VR | LCD Contrast Adjustment when IRS = “L” |
| 33 | C86 | Interface selection 6800/8080 |
| 34 | P/S | Selects the interface type: Serial or Parallel. |
| 35~36 | NC | No connection |
Mechanical Data
| Item | Standard Value | Unit |
|---|---|---|
| Module Dimension | 142.5 × 51.7 | mm |
| Viewing Area | 130.2 × 37.6 | mm |
| Mounting Hole | 135.2 × 44.7 | mm |
| Dot Pitch | 0.53 × 0.53 | mm |
| Dot Size | 0.50 × 0.50 | mm |
Electrical Characteristics
| Item | Symbol | Standard value typ. |
Unit |
|---|---|---|---|
| Input Voltage | VDD | 3.3 | V |
| Recommended LCD Driving Voltage for Normal Temp. Version module @25°C |
Vo-Vss | 11.0 | V |
Search Keyword: 240x64 lcd, 240 x 64 lcd, lcd 240x64, lcd 240 x 64
