5,7 Zoll Resistiver Touch TFT-LCD Modul
Modellnummer WF57DTIACDNT0
►Größe: 5,7 Zoll
►Auflösung: 320 x 240 Punkten
►Betrachtungsrichtung: 12H
►Schnittstelle: RGB
►Integrierter Controller: --
►Steuerplatine: optional
►Helligkeit (cd/m²): 600
►Durchsteckrahmen: Nein
►Touchscreen: Resistiver Touchscreen
►O-Film : optional
Zeichnung
Technische Daten
Schnittstelle
LCM PIN Definition
| Pin No. | Symbol | I/O | Funktion |
|---|---|---|---|
| 1 | IF1 | I | Input data format control (Note1) |
| 2 | IF2 | I | Input data format control (Note1) |
| 3 | POL | O | Polarity Signal connect to VCOM driving circuit. |
| 4 | RESET | I | Hardware reset. |
| 5 | SPENA | I | Chip select |
| 6 | SPCL | I | Serial Clock |
| 7 | SPDA | I/O | Serial Data |
| 8 | B0 | I | Blue Data bit (LSB) |
| 9 | B1 | I | Blue Data bit |
| 10 | B2 | I | Blue Data bit |
| 11 | B3 | I | Blue Data bit |
| 12 | B4 | I | Blue Data bit |
| 13 | B5 | I | Blue Data bit |
| 14 | B6 | I | Blue Data bit |
| 15 | B7 | I | Blue Data bit(MSB) |
| 16 | G0 | I | Green Data bit(LSB) |
| 17 | G1 | I | Green Data bit |
| 18 | G2 | I | Green Data bit |
| 19 | G3 | I | Green Data bit |
| 20 | G4 | I | Green Data bit |
| 21 | G5 | I | Green Data bit |
| 22 | G6 | I | Green Data bit |
| 23 | G7 | I | Green Data bit(MSB) |
| 24 | R0 | I | Red Data bit(LSB) |
| 25 | R1 | I | Red Data bit |
| 26 | R2 | I | Red Data bit |
| 27 | R3 | I | Red Data bit |
| 28 | R4 | I | Red Data bit |
| 29 | R5 | I | Red Data bit |
| 30 | R6 | I | Red Data bit |
| 31 | R7 | I | Red Data bit(MSB) |
| 32 | Hsync | I | Horizontal synchronous signal |
| 33 | Vsync | I | Vertical synchronous signal |
| 34 | Data CLK | I | Dot data clock |
| 35 | AVDD | I | 4.5V~5.5V |
| 36 | AVDD | I | 4.5V~5.5V |
| 37 | Vcc | I | 3V~3.6V |
| 38 | Vcc | I | 3V~3.6V |
| 39 | NPC | O | NTSC/PAL mode Auto detection result H:NTSC/L:PAL |
| 40 | VGL | I | Gate off power |
| 41 | VGL | I | Gate off power |
| 42 | UD | I | Up/Down scan setting. H: Reverse scan / L: Normal scan |
| 43 | VGH | I | Gate on power |
| 44 | LRC | I | Shift direction of device internal shift register control. |
| 45 | GND | I | GROUND |
| 46 | VCOM | I | VCOM driving input |
| 47 | VCOM | I | VCOM driving input |
| 48 | ENB | I | Data enable input. Normally pull low. |
| 49 | GND | I | GROUND |
| 50 | GND | I | GROUND |
Allgemeine Spezifikationen
| Artikel | Ausmaß | Einheit |
|---|---|---|
| Größe | 4,3 | Zoll |
| Punktmatrix | 320 × RGB × 240 (TFT) | Punkte |
| Abmaße der modul | 126,00(W) × 101,55(H) × 7,5(D)(MAX) | mm |
| Aktiver Bereich | 115,2 × 86,40 | mm |
| Punktabstand | 0,12 × 0,36 | mm |
| LCD Typ | TFT, Weiß, Transmissiv | |
| Betrachtungsrichtung | 12 o'clock | |
| Grauskala-Umkehrrichtung | 6 o'clock | |
| Seitenverhältnis | 4:3 | |
| Hintergrundbeleuchtung Typ | LED, Weiß | |
| Touchscreen | Resistiver Touchscreen | |
| Oberfläche | Anti-Reflextion | |
absolute Grenzwerte
| Artikel | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
|---|---|---|---|---|---|
| Betriebstemperatur | TOP | -20 | － | +70 | ℃ |
| Lagertemperatur | TST | -30 | － | +80 | ℃ |
elektrische Eigenschaften
| Artikel | Symbol | Bedingung | Mindestwert | typischer Wert | Maximalwert | Einheit |
|---|---|---|---|---|---|---|
| Supply Voltage For LCM | VCC | － | 3,0 | 3,3 | 3,6 | V |
| Input High Volt. | VIH | － | 0,7 VCC | － | VCC | V |
| Input Low Volt. | VIL | － | 0 | － | 0,3 VCC | V |
| LCD Driving Supply Voltage | VGH x1 | Ta=25℃ | - | 15 | - | V x 3 |
| VGL x 2 | - | -10 | - | |||
| VcomH | 2,5 | - | 5,5 | |||
| VcomL | -2,0 | - | 0 | |||
| Supply Current For LCM | IVCC | VCC=3.3V | － | 5 | 8 | mA |
