LCD Electrónica SPI / 6800 / 8080, COG, 240x64
Modelo Nº WO24064D
►COG LCD
►Display Grafico
►240×64 puntos incluye cursor
►Controlador integrado ST7586S
►Fuente de alimentación de 3,3V
►1/64 duty cycle
►Interfaz : 6800/8080/SPI
DIBUJO
ESPECIFICACIONES
Función interfaz Pin
| Pin No. | Símbolo | Función |
|---|---|---|
| 1 | VG | VG is the power of SEG-drivers. |
| 2 | XV0 | Negative operating voltage of COM-drivers. |
| 3 | V0 | Positive operating voltage for Vop generator. |
| 4 | VM | VM is the non-select voltage level of COM-drivers. |
| 5 | VDDA | Analog power for internal booster. |
| 6 | VSS | Ground |
| 7 | VD1 | VD1 is the power source of digital circuits. |
| 8 | VDDI | Power of interface I/O circuit. |
| 9 | CSB | Chip select input pins |
| 10 | IF3 | These pins select interface operation mode. "110" : 80 series。 "100" : 68 series。 "011" : SPI-4 。"010" : SPI-3 |
| 11 | IF2 | |
| 12 | IF1 | |
| 13 | RSTB | Controller reset signal, Active Low |
| 14 | /RD(E) | 8080 family: Read signal, 6800 family: Enable clock |
| 15~22 | D7~D0 | Data bus line |
| 23 | NC | No connection |
| 24 | /WR(R/W) | 8080 family: Write signal, 6800 family: Read/Write signal |
| 25 | A0(SCL) | Data/ Instruction select signal / In serial mode used as SCL (serial-clock) |
| 26 | VSS | Ground |
Datos mecánicos
| Elemento | Valor estándar | Unidad |
|---|---|---|
| Dimensión del módulo | 86.2 × 39.3 | mm |
| Área de visualización | 80.8 × 24.8 | mm |
| Distancia entre puntos | 0.32 × 0.32 | mm |
| Tamaño del punto | 0.30 × 0.30 | mm |
Características electrónicas
| Elemento | Símbolo | Valor estándar Valor típico |
Unidad |
|---|---|---|---|
| Input Voltage | VDD | 3.3 | V |
| Tensión de conducción LCD recomendada para temp. normal Módulo versión @25°C | Vo-Vss | 10.0 | V |
Search Keyword: 240x64 lcd, 240 x 64 lcd, lcd 240x64, lcd 240 x 64
