N° de modèle WF121ETWAMLNN0
►Dimension 12.1 pouces
►Résolution d’écran: 1024 x 768 points
►Vue préférentielle IPS
►Interface : LVDS
►TFT CI pilote :--
►Carte de contrôle: NON
►Luminosité (Cd/m²): 600
►Cadre de maintien avec points de fixation: NON
►Dalle tactile: NON
►Température d’utilisation: -30~+80°C
DESSIN
SPÉCIFICATIONS
Fonction PIN sur l'interface
TFT LCD Module
| Pin | Name | Description |
|---|---|---|
| 1 | RX3+ | Differential Data Input, CH3 ( Positive ) |
| 2 | RX3- | Differential Data Input, CH3 (Negative ) |
| 3 | NC | NC |
| 4 | SEL68 | LVDS 6/8 bit select function control, Low or NC 6 bit Input Mode High 8 bit Input Mode |
| 5 | GND | Ground |
| 6 | RXC+ | Differential Clock Input ( Positive ) |
| 7 | RXC- | Differential Clock Input ( Negative ) |
| 8 | GND | Ground |
| 9 | RX2+ | Differential Data Input , CH2 ( Positive ) |
| 10 | RX2- | Differential Data Input , CH2 ( Negative ) |
| 11 | GND | Ground |
| 12 | RX1+ | Differential Data Input, CH1 ( Positive ) |
| 13 | RX1- | Differential Data Input, CH1 ( Negative ) |
| 14 | GND | Ground |
| 15 | RX0+ | Differential Data Input, CH0 ( Positive ) |
| 16 | RX0- | Differential Data Input, CH0 (Negative ) |
| 17 | reLR | Horizontal Reverse Scan Control, Low or NC Normal Mode. High Horizontal Reverse Scan |
| 18 | reUD | Vertical Reverse Scan Control, Low or NC Normal Mode, High Vertical Reverse Scan |
| 19 | VCC | Power supply |
| 20 | VCC | Power supply |
Backlight Unit (Converter connector pin)
| Pin | Symbole | Description |
|---|---|---|
| 1 | Vi | Converter input voltage |
| 2 | Vi | Converter input voltage |
| 3 | Vi | Converter input voltage |
| 4 | Vi | Converter input voltage |
| 5 | VGND | Converter ground |
| 6 | VGND | Converter ground |
| 7 | VGND | Converter ground |
| 8 | VGND | Converter ground |
| 9 | EN | Enable pin |
| 10 | ADJ | Backlight Adjust |
Spécifications générales
| Article | Dimensions | Unité |
|---|---|---|
| Dimension | 12.1 | pouces |
| Pixel Number | 1024 × R.G.B. × 768 | pixel |
| Dimensions du module | 260.5 × 204.0 × 8.4 | mm |
| Bezel Opening Area | 249.0 × 187.5 | mm |
| Zone active | 245.76 (H) × 184.32 (V) | mm |
| Pas des points | 0.240(H) × 0.240(V) | mm |
| Type de LCD | TFT, Noir, Transmissif | |
| Vue préférentielle | Wide View | |
| Rapport d'aspect | 4:3 | |
| TFT pilote IC | TBD | |
| TFT Interface | 1ch-LVDS | |
| Type de rétroéclairage | LED, Blanc | |
| Panneau tactile | sans panneau tactile | |
| Surface | Anti-reflets | |
Valeurs nominales maximales absolues
| Article | Symbole | Min | Valeur type | Max | Unité |
|---|---|---|---|---|---|
| Température de fonctionnement | TOP | -30 | － | +85 | ℃ |
| Température de stockage | TST | -40 | － | +90 | ℃ |
Caractéristiques électroniques
TFT LCD Module
| Parameter | Symbole | Valeur | Unité | |||
|---|---|---|---|---|---|---|
| Min | Valeur type | Max | ||||
| Power Supply Voltage | VCC | 3.0 | 3.3 | 3.6 | V | |
| Rush Current | IRUSH | - | - | 4 | A | |
| Power Supply Current | Blanc | - | - | 370 | 450 | mA |
| Noir | - | 300 | 380 | mA | ||
| Power Consumption | PL | - | 1.22 | 1.49 | W | |
| LVDS differential input voltage | |VID| | 100 | - | 600 | mV | |
| LVDS common input voltage | VICM | 0.7 | - | 1.6 | V | |
