规格图
产品规格
Pin功能定义
TFT LCD Module
| Pin | 符号 | 功能说明 |
|---|---|---|
| 1 | RX3+ | Differential Data Input, CH3 ( Positive ) |
| 2 | RX3- | Differential Data Input, CH3 (Negative ) |
| 3 | NC | NC |
| 4 | SEL68 | LVDS 6/8 bit select function control, Low or NC 6 bit Input Mode High 8 bit Input Mode |
| 5 | GND | Ground |
| 6 | RXC+ | Differential Clock Input ( Positive ) |
| 7 | RXC- | Differential Clock Input ( Negative ) |
| 8 | GND | Ground |
| 9 | RX2+ | Differential Data Input , CH2 ( Positive ) |
| 10 | RX2- | Differential Data Input , CH2 ( Negative ) |
| 11 | GND | Ground |
| 12 | RX1+ | Differential Data Input , CH1 ( Positive ) |
| 13 | RX1- | Differential Data Input, CH1 ( Negative ) |
| 14 | GND | Ground |
| 15 | RX0+ | Differential Data Input, CH0 ( Positive ) |
| 16 | RX0- | Differential Data Input, CH0 (Negative ) |
| 17 | reLR | Horizontal Reverse Scan Control, Low or NC Normal Mode. High Horizontal Reverse Scan |
| 18 | reUD | Vertical Reverse Scan Control, Low or NC Normal Mode, High Vertical Reverse Scan |
| 19 | VCC | Power supply |
| 20 | VCC | Power supply |
Backlight Unit (Converter connector pin)
| Pin | 符号 | 功能说明 |
|---|---|---|
| 1 | Vi | Converter input voltage |
| 2 | Vi | Converter input voltage |
| 3 | Vi | Converter input voltage |
| 4 | Vi | Converter input voltage |
| 5 | VGND | Converter ground |
| 6 | VGND | Converter ground |
| 7 | VGND | Converter ground |
| 8 | VGND | Converter ground |
| 9 | EN | Enable pin |
| 10 | ADJ | Backlight Adjust |
规格说明
| 项目 | 规格 | 单位 |
|---|---|---|
| 尺寸(对角线) | 12.1 | 寸 |
| 点阵(分辨率) | 1024 × R.G.B. × 768 | 像素 |
| 模块尺寸 | 260.5 × 204.0 × 8.4 | mm |
| Bezel Opening Area | 249.0 × 187.5 | mm |
| 有效区域 | 245.76 (H) × 184.32 (V) | mm |
| 像素间距 | 0.240(H) × 0.240(V) | mm |
| LCD类型 | TFT, 平常黑, 透射式 | |
| 视角 | 宽视角 | |
| 长宽比 | 4:3 | |
| TFT驱动IC | -- | |
| TFT接口 | 1ch-LVDS | |
| 背光类型 | LED, 平常白 | |
| 触控面板 | 无触控面板 | |
| 表面 | 防眩光 | |
最大绝对额定值
| 项目 | 符号 | 最小值 | 典型值 | 最大值 | 单位 |
|---|---|---|---|---|---|
| 工作温度 | TOP | -30 | － | +85 | ℃ |
| 储存温度 | TST | -40 | － | +90 | ℃ |
电气特性
TFT LCD Module
| 参数 | 符号 | 标准值 | 单位 | |||
|---|---|---|---|---|---|---|
| 最小值 | 典型值 | 最大值 | ||||
| 输入信号电压 | VCC | 3.0 | 3.3 | 3.6 | V | |
| 冲击电流 | IRUSH | - | - | 4 | A | |
| 电源电流 | 白 | - | - | 370 | 450 | mA |
| 黑 | - | 300 | 380 | mA | ||
| 耗电量 | PL | - | 1.22 | 1.49 | W | |
| LVDS differential input voltage | |VID| | 100 | - | 600 | mV | |
| LVDS common input voltage | VICM | 0.7 | - | 1.6 | V | |
