Model No. WF57QTIBCDBGA

►Tamanho: 5,7 polegadas
►Resolução : 320 x 240 pontos
►Direção de exibição: 12H
►Interface : MCU
►Controlador SSD1963 integrado
►Placa de controle : Yes
►Brilho(cd/m²): 700
►Quadro com furo passante: Yes
►Tela de Toque: Com painel de toque capacitivo (PCAP)
►Detect Point : 5 Fingers
►O-Film : Opção

PDF DOWNLOAD

DEMO CODE

ADD TO INQUIRY

PREV. BACK to LIST NEXT

DRAWING

TFT 320x240 Display with Controller Board - WF57QTIBCDBGA - Winstar

SPECIFICATIONS

Interface

Pin	Symbol	Function
1	GND	System ground pin of the IC . Connect to system ground.
2	VDD	Power Supply : +3.3V
3	BLE	Backlight control signal , H: On \ L: Off
4	D/C	Data/Command select
5	WR	Write strobe signal
6	RD	Read strobe signal
7~14	DB0~DB7	Data bus
15~22	DB8~DB15	Data bus (When select 8bits Mode, this pin is NC)
23	NC	No connect
24	CTP_INT	CTP_ External interrupt to the host
25	CS	Chip select
26	RESET	Hardware reset
27	L/R	Left / right selection; Default L/R=H
28	U/D	Up/down selection; ; Default U/D=L
29	CTP_SCL	CTP_SPI Slave mode, chip select, active low / I2C clock input
30	CTP_SDA	CTP_ SPI Slave mode, data input / I2C data input and output
31	CTP_RST	CTP_ External Reset, Low is active
32	NC	No connect
33~34	VLED-	Power for LED Driver IC(GND)
35~36	VLED+	Power for LED Driver IC(+5V)

General Specifications

Item	Dimension	Unit
Size	5.7	inch
Dot Matrix	320 × RGB × 240(TFT)	dots
Module dimension	141.12 × 101.55 × 15.24	mm
Active area	115.2 × 86.4	mm
Dot pitch	0.12 × 0.36	mm
LCD type	TFT, Normally White, Transmissive
View Direction	12 o'clock
Gray Scale Inversion Direction	6 o'clock
Aspect Ratio	4:3
Backlight Type	LED, Normally White
Controller IC	SSD1963
TFT Interface	Digital 8080 family MPU 8bit/16bit
PCAP IC	FT5426
PCAP Interface	I2C
PCAP FW Version	FN058A001_FT5426_V02_20180604_all.bin
Touch Panel	Projected capacitive touch panel (PCAP)
Surface	Glare