Model No. WF0096ATYAA3DNN0
►Tamanho: 0,96 polegadas
►Resolução : 80×160 pontos
►Direção de exibição: IPS
►Interface: SPI
►Controlador ST7735S integrado
►Placa de controle: Não
►Brilho(cd/m²): 500
►Quadro com furo passante: Não
►Tela de Toque: Não
DRAWING
SPECIFICATIONS
Interface
LCM PIN Definition| Pin | Symbol | Function |
|---|---|---|
| 1 | SPI4W | SPI4W='0' , 3-wire SPI. SPI4W='1' , 4-wire SPI. |
| 2 | NC | No connection |
| 3 | SDA | Serial interface data |
| 4 | SCL | Serial interface clock |
| 5 | RS | Data/command selection pin (4-wire SPI use) |
| 6 | RES | Reset pin (low active) |
| 7 | CS | Chip selection pin (low active) |
| 8 | GND | Ground |
| 9 | NC | No connection |
| 10 | VCC | Power supply |
| 11 | LEDK | Back light cathode |
| 12 | LEDA | Back light anode |
| 13 | GND | Ground |
General Specifications
| Item | Dimension | Unit |
|---|---|---|
| Size | 0.96 | inch |
| Dot Matrix | 80 × RGB × 160(TFT) | dots |
| Module dimension | 13.5(W) × 27.95(H) × 1.54(D) | mm |
| Active area | 10.8 × 21.696 | mm |
| Dot pitch | 0.135 × 0.1356 | mm |
| LCD type | TFT, Normally black, Transmissive | |
| Viewing Angle | 80/80/80/80 (IPS) | |
| Aspect Ratio | 1:2 | |
| IC | ST7735S | |
| Backlight Type | LED, Normally White | |
| Touch Panel | Without Touch Panel | |
| Surface | Glare | |
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Electrical Characteristics
Operating conditions| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VCC | 3.0 | 3.3 | 3.6 | V |
| Supply LCM current | ICC | － | － | 2 | mA |
LED driving conditions
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| LED current | ILED | － | 20 | － | mA |
| LED voltage | VLED | 2.8 | 3.1 | 3.3 | V |
| LED Life Time | － | 50000 | － | Hr |
