Android 主板, Linux 主板, 嵌入式单板电脑
型号 WUABAB120V0000N0NX00 / WUABLB120V0000N0NX00
►WUABAB 系列 : Android 主板, 嵌入式单板电脑
►WUABLB 系列 : Linux Yocto 主板, 嵌入式单板电脑
►无 WIFI
►嵌入式单板电脑 特性:
►NXP Cortex-A9 Dual lite @ 1.0GHz
►On-board DDR3 Up to 1GB & 8GB eMMC NAND Flash
►支持 LVDS 高分辨率显示器、RGB 并行接口和HDMI(1920*1080)
►Full HD 译码器, 2D/3D, OpenGL ES2.0 或更高版本
►低耗电
►支持 Android 4.4.2 / Linux yocto Daisy 1.6 (QT Included)
►支持 TFT 模块尺寸 5吋~12.1吋 (支持 RGB & LVDS)
产品叙述
硬件简介：
WUABAB120V / WUABLB120V主板是使用NXP i.MX6嵌入式System-on-chip (SoC) 系统的单板电脑（SBC）。华凌嵌入式主板可支持5英寸~12.1吋的TFT模块，同时此款主板提供Android和Linux操作系统可供选择。WUABAB120V具有可扩展的多核ARM Cortex™A9处理器，具有一到四个相应的版本。该模块以最低功耗提供高CPU和图形性能。
此嵌入式主板支持多种接口(interface)，从简单的GPIO，工业标准I2C，SPI和UART到高速USB 2.0接口和16/32bit外部memory bus (parallel bus)的各种接口。支持RGB和LVDS接口并提供用户连接高分辨率的显示器。WUABAB120V i.MX6主板支持不同类型的连接器，包括主机USB，USB OTG，DC插孔，音频插孔和RJ45。客户可以自行扩展接口。连接器可以匹配3种类型的排针/连接器，分别为1.27mm，2.0mm和2.54mm。
软件简介:
WUAB 系列嵌入式单板计算器支持Android 4.4.2和Linux操作系统，以下是无WIFI版主板完整的料号:
WUABAB120V0000N0NX00:支持Android操作系统，无WIFI版
WUABLB120V0000N0NX00:支持Linux操作系统，无WIFI版
规格图
产品规格
嵌入式单板计算机
| Processor System | CPU | iMX6 DL - Dual core 1.0GHz (Dual core up to 1GHz per core) |
| Memory | Memory | Onboard DDR3L 1GB x64 bit |
| Mass storage | On-board eMMC drive, up to 8GB | |
| Video | LVDS | 24 bit LVDS (1024*600、1280*800) |
| RGB | 24-bits TTL with DE+ H/V sync (800*480) | |
| HDMI | V1.4 (1920*1080) | |
| Graphic | Graphic engine | Dedicated 2D Hardware accelerator |
| Dedicated 3D Hardware accelerator (Supports OpenGL ES2.0 3D) | ||
| H/W Video codec | Support MPEG 1/2/4, H.264 Hardware Decoder. | |
| Display | Support 2 types independent display with iMX6DL and i.MX6D/Q | |
| Network | Ethernet | 1 GbE + IEEE1588 with RJ45 slot |
| WIFI/BT | BLE 4.0 (internal USB for option WIFI Module, Optional Parts) | |
| USB | USB | 2 Standard USB 2.0 type A ; 1 x USB 2.0 OTG |
| 2*USB2.0 with pin header | ||
| Audio | Audio | WM8903 Audio codec with 3.5 mm stereo jack |
| Mic in, Line out internal pin header | ||
| I/O | Serial port | 4 x RS232 (3 x ePH connector, 1x ePHD for console,) ; |
| 1 x RS485 (1 x ePH connector) | ||
| IIC | 1 (Client, for PCAP use) | |
| GPIO | 32-pin 3.3V TTL Level GPIOs / 2-pin TTL PWM output | |
| Touch Panel | Resistive | 4-wire Resistive type (onboard) |
| Capacitive | CTP is driven IIC interface | |
| Clock | RTC | RTC Circuitry for low power consumption with Battery on-board |
| Expansion | SD Socket | 1 *μSD Slot (support up to SDXC) |
| Power | Voltage | DC9V ~ DC24V±10% |
| Consumption | 2.5W | |
| Environment | Temperature | -20℃ ~ 70℃ (Operating) |
| -30℃ ~ 80℃ (Storage) | ||
| Operating System | Android 4.4.2 or Linux Yocto Daisy 1.6 | |
| Dimension | 130mm * 95mm * 20mm | |
| Certification | CE/FCC |
结构
Block Diagram
图片显示IC组件和设备的连接
连接器和排针的位置
| 连接器编号 | 说明 | 连接器编号 | 说明 |
|---|---|---|---|
| J2(J8) | DC Power Jack | J15 | RS485 port |
| J5 | Micro SD Card Slot | J11 | Audio input interface |
| J6 | USB port in Type A connector | J12 | Audio output interface |
| J7 | Ethernet in RJ45 Slot | J19 | RTP interface |
| J22 | GPIO port1 | J4 | 3.5mm Earphone+ Micro phone |
| J24 | GPIO port2 | J1 | USB OTG interface |
| J9, J20 | USB port in pin header | J25 | I2C interface for CTP(PCAP) |
| J16, J18,J26 | RS232 port | J14 | RGB LCD interfaces |
| J23 | RS232 for Console | J3 | HDMI (1920*1080) |
| J10 | LVDS LCD interfaces | ||
| SW2 | Display selection switch |
