LCD Matrix Display 240x64
Modellnummer WO24064C
►COG LCD
►LCD Grafik
►240 x 64 Punkte inklusive Cursor
►Integrierter Controller ST7586S
►3,3-V-Stromversorgung
►1/64 duty cycle
►Schnittstelle : 6800/8080/SPI
Zeichnung
Technische Daten
Schnittstelle Pin-Funktion
| Pin No. | Symbol | Beschreibung |
|---|---|---|
| 1 | VG | VG is the power of SEG-drivers. |
| 2 | XV0 | Negative operating voltage of COM-drivers. |
| 3 | V0 | Positive operating voltage for Vop generator. |
| 4 | VM | VM is the non-select voltage level of COM-drivers. |
| 5 | VDDA | Analog power for internal booster. |
| 6 | VSS | Ground |
| 7 | VD1 | VD1 is the power source of digital circuits. |
| 8 | VDDI | Power of interface I/O circuit. |
| 9 | CSB | Chip select input pins |
| 10 | IF3 | These pins select interface operation mode. "110" : 80 series。 "100" : 68 series。 "011" : SPI-4 。"010" : SPI-3 |
| 11 | IF2 | |
| 12 | IF1 | |
| 13 | RSTB | Controller reset signal, Active Low |
| 14 | /RD(E) | 8080 family: Read signal, 6800 family: Enable clock |
| 15~22 | D7~D0 | Data bus line |
| 23 | NC | No connection |
| 24 | /WR(R/W) | 8080 family: Write signal, 6800 family: Read/Write signal |
| 25 | A0(SCL) | Data/ Instruction select signal / In serial mode used as SCL (serial-clock) |
| 26 | VSS | Ground |
mechanische Daten
| Artikel | Standardwert | Einheit |
|---|---|---|
| Abmaße der modul | 111,4 x 45,5 | mm |
| Anzeigebereich | 106,20 x 31,20 | mm |
| Punktabstand | 0,43 x 0,43 | mm |
| Punktgröße | 0,40 x 0,40 | mm |
elektrische Eigenschaften
| Artikel | Symbol | Standardwert typischer Wert |
Einheit |
|---|---|---|---|
| Input Voltage | VDD | 3,3 | V |
| Empfohlene LCD-Betriebsspannung bei 25°C für die Version des Normaltemperaturbereichs | Vo-Vss | 10,0 | V |
