产品叙述
华凌光电发表的型号WO24064C STN COG 240 x 64图形模组外形尺寸为111.4 x 45.5 mm, AA 区尺寸为103.17 x 27.49 mm。 WO24064C内置ST7586S IC，此模组支援6800/8080, 4 Line SPI 或3 Line SPI (optional)的接口。 WO24064C的操作温度是-20℃ to +70℃，储存温度为-30℃ to +80℃。
规格图
产品规格
Pin功能定义
| Pin No. | 符号 | 说明 |
|---|---|---|
| 1 | VG | VG is the power of SEG-drivers. |
| 2 | XV0 | Negative operating voltage of COM-drivers. |
| 3 | V0 | Positive operating voltage for Vop generator. |
| 4 | VM | VM is the non-select voltage level of COM-drivers. |
| 5 | VDDA | Analog power for internal booster. |
| 6 | V SS | Ground |
| 7 | VD1 | VD1 is the power source of digital circuits. |
| 8 | VDDI | Power of interface I/O circuit. |
| 9 | CSB | Chip select input pins |
| 10 | IF3 | These pins select interface operation mode. "110" : 80 series。 "100" : 68 series。 "011" : SPI-4 。 "010" : SPI-3 |
| 11 | IF2 | |
| 12 | IF1 | |
| 13 | RSTB | Controller reset signal, Active Low |
| 14 | /RD(E) | 8080 family: Read signal, 6800 family: Enable clock |
| 15~22 | D7~D0 | Data bus line |
| 23 | NC | No connection |
| 24 | /WR(R/W) | 8080 family: Write signal, 6800 family: Read/Write signal |
| 25 | A0(SCL) | Data/ Instruction select signal / In serial mode used as SCL (serial-clock) |
| 26 | V SS | Ground |
规格说明
| 项目 | 标准尺寸 | 单位 |
|---|---|---|
| 模组尺寸 | 111.4 x 45.5 | mm |
| 检视区域 | 106.20 x 31.20 | mm |
| 点间距 | 0.43 x 0.43 | mm |
| 点大小 | 0.40 x 0.40 | mm |
电气特性
| 项目 | 符号 | 标准值(典型值) | 单位 |
|---|---|---|---|
| 输入电压 | VDD | 3.3 | V |
| 常温25°C LCD驱动电压建议值 | Vo-Vss | 10.0 | V |
Search Keyword: 240x64 lcd, 240 x 64 lcd, lcd 240x64, lcd 240 x 64
