10.1寸1024x600高亮度LVDS介面 IPS 电容触控 TFT 显示器模组

型号 WF101JSYAHLNB0

►尺寸：10.1寸
►分辨率：1024×600 dots
►视角： IPS
►接口：LVDS
►驱动IC : EK79001HN + EK73215BCGA
►控制板：No
►亮度（cd/m2）：900
►铁框螺丝孔：无
►触控面板：电容触摸面板 (PCAP)
►支援指数: 5指

PDF下载

索取Demo Code

产品询问

上一个产品回分类页下一个产品

规格图

产品规格

Pin功能定义

Pin No.	符号	功能说明
1	VCOM	Common voltage
2	VDD	Digital power
3	VDD	Digital power
4	NC	Not connect
5	Reset	Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ，C=1μF)
6	STBYB	Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z
7	GND	Digital ground
8	RXIN0-	Negative LVDS differential data inputs
9	RXIN0+	Positive LVDS differential data inputs
10	GND	Digital ground
11	RXIN1-	Negative LVDS differential data inputs
12	RXIN1+	Positive LVDS differential data inputs
13	GND	Digital ground
14	RXIN2-	Negative LVDS differential data inputs
15	RXIN2+	Positive LVDS differential data inputs
16	GND	Digital ground
17	RXCLKN-	Negative LVDS differential clock inputs
18	RXCLKN+	Positive LVDS differential clock inputs
19	GND	Digital ground
20	RXIN3-	Negative LVDS differential data inputs
21	RXIN3+	Positive LVDS differential data inputs
22	GND	Digital ground
23	NC	Not connect
24	NC	Not connect
25	GND	Digital ground
26	NC	Not connect
27	NC	Not connect
28	SELB	6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit
29	AVDD	Analog power
30	GND	Digital ground
31	LED-	LED Cathode
32	LED-	LED Cathode
33	L/R	Left or right display control
34	U/D	Up / down display control
35	VGL	Negative power for TFT
36	NC	Not connect
37	NC	Not connect
38	VGH	Positive power for TFT
39	LED+	LED Anode
40	LED+	LED Anode

When L/R=”0”,set right to left scan direction.
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.

PCAP PIN 定义

Pin	符号	功能说明
1	USB_VSS	System ground
2	USB_VDD 5V	Power supply
3	USB_D+	Data +
4	USB_D-	Data -
5	VSS	System ground
6	SDA	I2C data input and output
7	SCL	I2C clock input
8	RST	External Reset, Low is active
9	INT	External interrupt to the host
10	VDDT 3.3	Power supply

规格说明

项目	规格	单位
显示尺寸(对角线)	10.1	寸
点阵(分辨率)	1024 RGB x 600	dots
模块尺寸	235(W) x 143(H) x 8.78(D)	mm
可视区域	222.72 (H) x 125.28(V)	mm
点间距	0.2175(W) x 0.2088(H)	mm
LCD类型	TFT 全透
接口	LVDS
驱动IC	EK79001HN + EK73215BCGA 或相容IC
视角	85/85/85/85
长宽比	16:9
背光类型	LED, 白色
PCAP IC	ILI2511 或相容IC
PCAP 接口	USB (I2C可用)
PCAP FW 版本	V6.0.0.0.62.90.1.2
触控面板类型	投射电容式触控面板 (PCAP)
表面	亮面

最大绝对额定值

项目	符号	最小值	典型值	最大值	单位
工作温度	TOP	-20	－	+70	℃
储存温度	TST	-30	－	+80	℃

电气特性

典型操作条件 (At Ta = 25 °C,)

项目	符号	最小值	典型值	最大值	单位
LCD数字电源电压	VDD	3	3.3	3.6	V
模拟电源电压	AVDD	9.89	10.2	10.5	V
Gate 开启供电电压	VGH	19.4	20.0	20.6	V
Gate 关闭供电电压	VGL	-10.3	-10.0	-9.7	V
一般供电电压	VCOM	4.0	4.3	4.6	V
逻辑输入高电压	VIH	0.7 VDD	-	VDD	V
逻辑输入低电压	VIL	0	-	0.3 VDD	V
Supply PCAP	USB_VDD 5V	4.4	5.0	5.5	V
Supply PCAP	I VDD 5V	—	97.8	120	mA