96x64, 1.1 zoll PMOLED-Display
Modellnummer WEA009664B
►1,1 Zoll OLED
►Typ: Grafik
►Bauweise: COG+PCB
►96×64 Punktmatrix
►Integrierter Controller SSD1327
►3-V-Stromversorgung
►1/64 duty
►Schnittstelle: SPI, I2C
►die Farbe des Displays: Weiß / Gelb
►Support Grayscale
Zeichnung
Technische Daten
Schnittstelle Pin-Funktion
| No. | Symbol | Funktion |
|---|---|---|
| 1 | SDA | When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL. |
| 2 | SCL | |
| 3 | SA0 | In I2C mode, this pin acts as SA0 for slave address selection. When 3-wire serial interface is selected, this pin must be connected to VSS. |
| 4 | RST | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation. |
| 5 | CS | This pin is the chip select input. (active LOW). |
| 6 | VDD | 3.0V Power supply pin for core logic operation. |
| 7 | VIN | 5.0V Power supply pin for core logic operation. |
| 8 | GND | This is a ground pin. |
mechanische Daten
| Artikel | Ausmaß | Einheit |
|---|---|---|
| Punktmatrix | 96 × 64 | Punkte |
| Abmaße der modul | 31,5 × 31,5 × 2,72 | mm |
| Aktiver Bereich | 22,53 × 15,01 | mm |
| Pixelgröße | 0,205 × 0,205 | mm |
| Pixelabstand | 0,235 × 0,235 | mm |
| der Anzeigemodus | Passive Matrix | |
| die Farbe des Displays | Monochrome | |
| Gray scale | 4 bits | |
| Drive Duty | 1/64 Duty | |
| IC | SSD1327 | |
| Schnittstelle | SPI , Optionale I2C | |
| Größe | 1,1 Zoll | |
elektronische Eingenschaften
| Artikel | Symbol | Bedingung | Mindestwert | typischer Wert | Maximalwert | Einheit |
|---|---|---|---|---|---|---|
| Supply Voltage for Logic | VDD | － | 2,8 | 3,0 | 3,2 | V |
| Supply Voltage for Logic | VIN | － | 4,8 | 5,0 | 5,2 | V |
| Supply Voltage for Display | VCC | － | 7,5 | 8,0 | 8,5 | V |
| Input High Volt. | VIH | － | 0,8×VDD | － | VDDIO | V |
| Input Low Volt. | VIL | － | 0 | － | 0,2×VDD | V |
| Output High Volt. | VOH | － | 0,9×VDD | － | VDDIO | V |
| Output Low Volt. | VOL | － | 0 | － | 0,1×VDD | V |
| 50% Check Board operating Current | IDD | VDD=3,0V | － | 55 | 100 | mA |
absolute Grenzwerte
| Parameter | Symbol | Mindestwert | Maximalwert | Einheit |
|---|---|---|---|---|
| Supply Voltage for Logic | VDD | 1,65 | 3,30 | V |
| Supply Voltage for Logic | VIN | 4,0 | 6,0 | V |
| Supply Voltage for Display | VCC | 0 | 16,0 | V |
| Betriebstemperatur | TOP | -40 | 80 | °C |
| Lagertemperatur | TSTG | -40 | 85 | °C |
