Pantalla Tipo OLED 1.1 pulgada, 96x64, SSD1327, SPI, I2C
Modelo Nº WEA009664B
►Tipo: Gráfico
►Estructura: COG+PCB
►Tamaño : 1.1 inch
►Matriz de puntos 96×64
►Controlador integrado SSD1327
►Fuente de alimentación de 3V
►1/64 duty
►Interfaz : SPI, I2C
►Color de la pantalla: Blanco / Amarillo
►Support Grayscale
DIBUJO
ESPECIFICACIONES
Función interfaz Pin
| No. | Símbolo | Función |
|---|---|---|
| 1 | SDA | When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL. |
| 2 | SCL | |
| 3 | SA0 | In I2C mode, this pin acts as SA0 for slave address selection. When 3-wire serial interface is selected, this pin must be connected to VSS. |
| 4 | RST | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation. |
| 5 | CS | This pin is the chip select input. (active LOW). |
| 6 | VDD | 3.0V Power supply pin for core logic operation. |
| 7 | VIN | 5.0V Power supply pin for core logic operation. |
| 8 | GND | This is a ground pin. |
Datos mecánicos
| Elemento | Dimensión | Unidad |
|---|---|---|
| Matriz de puntos | 96 × 64 | Dots |
| Dimensión del módulo | 31.5 × 31.5 × 2.72 | mm |
| zona activa | 22.53 × 15.01 | mm |
| Tamaño del punto | 0.205 × 0.205 | mm |
| Distancia entre puntos | 0.235 × 0.235 | mm |
| Modo de visualización | Matriz pasiva | |
| Color de la pantalla | Monocromos | |
| Gray scale | 4 bits | |
| Drive Duty | 1/64 Duty | |
| IC | SSD1327 | |
| Interfaz | SPI ,Optional I2C | |
| Tamaño | 1.1 pulgada | |
Características electrónicas
| Elemento | Símbolo | Condición | Valor mín. | Valor típico | Valor máx. | Unidad |
|---|---|---|---|---|---|---|
| Supply Voltage for Logic | VDD | － | 2.8 | 3.0 | 3.2 | V |
| Supply Voltage for Logic | VIN | － | 4.8 | 5.0 | 5.2 | V |
| Supply Voltage for Display | VCC | － | 7.5 | 8.0 | 8.5 | V |
| Input High Volt. | VIH | － | 0.8×VDD | － | VDDIO | V |
| Input Low Volt. | VIL | － | 0 | － | 0.2×VDD | V |
| Output High Volt. | VOH | － | 0.9×VDD | － | VDDIO | V |
| Output Low Volt. | VOL | － | 0 | － | 0.1×VDD | V |
| 50% Check Board operating Current | IDD | VDD=3.0V | － | 55 | 100 | mA |
Valores nominales máximos absolutos
| Parameter | Símbolo | Valor mín. | Valor máx. | Unidad |
|---|---|---|---|---|
| Supply Voltage for Logic | VDD | 1.65 | 3.30 | V |
| Supply Voltage for Logic | VIN | 4.0 | 6.0 | V |
| Supply Voltage for Display | VCC | 0 | 16.0 | V |
| Temperatura de funcionamiento | TOP | -40 | 80 | °C |
| Temperatura de almacenamiento | TSTG | -40 | 85 | °C |
