مدل شماره WO240128B
◄COG LCD
◄LCD گرافیکی
◄240 × 128 نقطه
◄کنترلگر ST7586S
◄منبع انرژی +3.3V
◄1/128 چرخه کار
◄رابط: 6800/8080/SPI
طراحی
مشخصات
عملکرد پین رابط
| .Pin No | نماد | عملکرد |
|---|---|---|
| 1 | ESD GND | Electro-Static discharge |
| 2 | VG | VG is the power of SEG-drivers |
| 3 | XV0 | Negative operating voltage of COM-drivers |
| 4 | V0 | Positive operating voltage of COM-drivers |
| 5 | VM | VM is the non-select voltage level of COM-drivers |
| 6 | VDDA | Power supply |
| 7 | VSS | Ground |
| 8 | VD1 | Digital power source selection |
| 9 | VDDI | VDD1 is the power of interface I/O circuit |
| 10 | CSB | Chip select input pin CSB=“L”: This chip is selected and the MPU interface is active CSB=“H”: This chip is not selected and the MPU interface is disabled (D[7:0] are high impedance) |
| 11 12 13 |
IF3 IF2 IF1 |
These pins select interface operation mode Note: Refer to “Interface Selection” for detailed information |
| 14 | RSTB | Reset input pin. When RSTB is “L”, internal initialization procedure is executed |
| 15 | (/RD(E | (Read / Write execution control pin. (This pin is only used in parallelinterface This pin is not used in serial interfaces and should be connected to VDD1 |
| 16~23 | D7~D0 | The bi-directional data bus of the MPU interface. When CSB is “H”, they are high impedance If using serial interface: D0 is the SDA signal in 4-Line & 3-Line interface D1 is the A0 signal in 4-Line interface |
| 24 | (/WR/(R/W | (Read / Write execution control pin. (This pin is only used in parallel interface This pin is not used in serial interfaces and should be connected to VDD1 |
| 25 | (A0(SCL | The function of this pin is different in parallel and serial interface In parallel interface: A0 is register selection input A0 = "H": inputs on data bus are display data A0 = "L": inputs on data bus are command In serial interface: this pad will be used as SCL (serial-clock) input |
| 26 | ESD GND | Electro-Static discharge |
داده مکانیکی
| مورد | ابعاد ماژول | واحد |
|---|---|---|
| وضوح | 240 × 128 | － |
| ابعاد ماژول | 122.2 × 79.8 × 6.5 | mm |
| ناحیه در حال نمایش | 114.0 × 64.0 | mm |
| ناحیه فعال | 107.98 × 57.58 | mm |
| اندازه نقطه | 0.43 × 0.43 | mm |
| درجه نقطه | 0.45 × 0.45 | mm |
| روش درایو | 1/128Duty，1/12Bias | |
| نوع نور پسزمینه | LED | |
| IC | ST7586S | |
بیشینه مقادیر مجاز مطلق
| مورد | نماد | مقدار حداقل | مقدار معمول | مقدار حداکثر | واحد |
|---|---|---|---|---|---|
| دمای عملیاتی | TOP | -20 | － | +70 | ℃ |
| دمای بستهبندی | TST | -30 | － | +80 | ℃ |
| Digital Power Supply Voltage | VDDI | -0.3 | － | 3.6 | V |
| Analog Power supply voltage | VDDA | -0.3 | － | 3.6 | V |
| LCD Power supply voltage | V0-XV0 | -0.3 | － | 19 | V |
| LCD Power supply voltage | VG | -0.3 | － | 5.5 | V |
مشخصات الکترونیکی
| مورد | نماد | وضعیت | مقدار حداقل | مقدار معمول | مقدار حداکثر | واحد |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | － | 3.0 | 3.3 | 3.6 | V |
| Supply Voltage For LCM | VOP | Ta=-20℃ Ta=25℃ Ta=+70℃ |
－ 14.8 － |
－ 15.0 － |
－ 15.2 － |
V V V |
| .Input High Volt | VIH | － | 0.7VDD | － | VDD | V |
| .Input Low Volt | VIL | － | Vss | － | 0.3 VDD | V |
| .Output High Volt | VOH | － | 0.8 VDD | － | VDD | V |
| .Output Low Volt | VOL | － | Vss | － | 0.2VDD | V |
| .Supply Current | IDD | VDD=3.3V | － | － | 2.0 | mA |
