| Pin |
기호 |
기능 |
| 1 |
NC/TP_GND |
No connection |
| 2 |
NC/TP_SDA |
No connection |
| 3 |
NC/TP_SCL |
No connection |
| 4 |
NC/TP_INT |
No connection |
| 5 |
NC/TP_RST |
No connection |
| 6 |
NC/YU |
No connection |
| 7 |
NC/XL |
No connection |
| 8 |
NC/YD |
No connection |
| 9 |
NC/XR |
No connection |
| 10-11 |
VCI |
Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V |
| 12-13 |
NC |
No connection |
| 14 |
RESET |
The external reset input
Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
Fix to VDDI level when not in use. |
| 15 |
TE |
Tearing effect output pin.
Leave the pin open when not in use. |
| 16 |
NC |
No connection |
| 17-18 |
GND |
Power ground |
| 19-20 |
IOVCC |
Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V |
| 21 |
GND |
Power ground |
| 22 |
D3P |
MIPI DSI differential data pair. (Data lane 3) |
| 23 |
D3N |
| 24 |
GND |
Power ground |
| 25 |
D2P |
MIPI DSI differential data pair. (Data lane 2) |
| 26 |
D2N |
| 27 |
GND |
Power ground |
| 28 |
CLKP |
MIPI DSI differential clock pair |
| 29 |
CLKN |
| 30 |
GND |
Power ground |
| 31 |
D1P |
MIPI DSI differential data pair. (Data lane 1) |
| 32 |
D1N |
| 33 |
GND |
Power ground |
| 34 |
D0P |
MIPI DSI differential data pair. (Data lane 0) |
| 35 |
D0N |
| 36-37 |
GND |
Power ground |
| 38 |
LED+ |
Power for LED backlight anode |
| 39 |
LED1- |
Power for LED1 backlight cathode |
| 40 |
LED2- |
Power for LED2 backlight cathode |
