Wyświetlacze COG+PCB LCD 240x128 + PCB
Numer modelu WO240128B2
►COG LCD
►wyświetlacz graficzny
►240 x 128 punktów
►wbudowany kontroler ST7586S
►zasilanie 3.3V
►cykl wypełnienia 1/128
►Interfejs : Default 6800, Option 8080, SPI-4 Line/SPI-3Line 9bit
Rysunek
Specyfikacja
Funkcja pinów interfejsu
| Pin No. | Symbol | Funkcja | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | VDD | Power supply | |||||||||
| 2 | NC | No connection | |||||||||
| 3 | VSS | Ground | |||||||||
| 4 | CSB | Chip select input pin CSB=“L”: This chip is selected and the MPU interface is active CSB=“H”: This chip is not selected and the MPU interface is disabled (D[7:0] are high impedance) |
|||||||||
| 5 | RSTB | Reset input pin. When RSTB is “L”, internal initialization procedure is executed | |||||||||
| 6 | /RD(E) | Read / Write execution control pin. (This pin is only used in parallelinterface)
|
|||||||||
| 7~14 | D7~D0 | The bi-directional data bus of the MPU interface. When CSB is “H”, they are high impedance If using serial interface: D0 is the SDA signal in 4-Line & 3-Line interface D1 is the A0 signal in 4-Line interface |
|||||||||
| 15 | /WR/(R/W) | Read / Write execution control pin. (This pin is only used in parallel interface)
|
|||||||||
| 16 | A0(SCL) | The function of this pin is different in parallel and serial interface In parallel interface: A0 is register selection input A0 = "H": inputs on data bus are display data A0 = "L": inputs on data bus are command In serial interface: this pad will be used as SCL (serial-clock) input |
|||||||||
| 17 | A | LED+ | |||||||||
| 18 | K | LED- |
Dane mechaniczne
| Rzecz | Standardowa wartość | Jednostka |
|---|---|---|
| Matryca punktowa | 240 × 128 | － |
| Wymiary modułu | 140.0 × 84.0 × 9.7 | mm |
| Obszar widoczny | 114.0 × 64.0 | mm |
| Obszar aktywny | 107.98 × 57.58 | mm |
| Wielkość piksela | 0.43 × 0.43 | mm |
| Raster pomiędzy pikselami | 0.45 × 0.45 | mm |
| napęd | 1/128 Duty，1/12 Bias | |
| Rodzaj podświetlenia | LED | |
| IC | ST7586S | |
Bezwzględne oceny maksymalne
| Rzecz | Symbol | Minimalna wartość | Typowa wartość | Maksymalna wartość | Jednostka |
|---|---|---|---|---|---|
| Temperatura pracy | TOP | -20 | － | +70 | ℃ |
| Temperatura przechowywania | TST | -30 | － | +80 | ℃ |
| Digital Power Supply Voltage | VDDI | -0.3 | － | 3.6 | V |
| Analog Power supply voltage | VDDA | -0.3 | － | 3.6 | V |
| LCD Power supply voltage | V0-XV0 | -0.3 | － | 19 | V |
| LCD Power supply voltage | VG | -0.3 | － | 5.5 | V |
Parametry elektryczne
| Rzecz | Symbol | Stan | Minimalna wartość | Typowa wartość | Maksymalna wartość | Jednostka |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | － | 3.0 | 3.3 | 3.6 | V |
| Supply Voltage For LCM | VOP | Ta=-20℃ Ta=25℃ Ta=+70℃ |
－ 14.8 － |
－ 15.0 － |
－ 15.2 － |
V V V |
| Input High Volt. | VIH | － | 0.7VDD | － | VDD | V |
| Input Low Volt. | VIL | － | VSS | － | 0.3 VDD | V |
| Output High Volt. | VOH | － | 0.8 VDD | － | VDD | V |
| Output Low Volt. | VOL | － | VSS | － | 0.2VDD | V |
| Supply Current | IDD | VDD=3.3V | － | 2.0 | 4.0 | mA |
Search keyword: 240x128 lcd, 240 x 128 lcd, lcd 240x128, lcd 240 x 128
