Ana sayfa Ürünler COG LCD Ekran WO240128B2
COG+PCB LCD Modülü 240x128 - WO240128B2
COG+PCB LCD Modülü 240x128 - WO240128B2
COG+PCB LCD Modülü 240x128 - WO240128B2
COG+PCB LCD Modülü 240x128 - WO240128B2

COG+PCB LCD Modülü 240x128

Model No. WO240128B2

►COG LCD
►Grafik LCD
►240 x 128 dots
►Kontrolör dahil ST7586S
►3.3V güç sağlayıcı
►1/128 görev döngüsü
►Ara yüz : Default 6800, Option 8080, SPI-4 Line/SPI-3Line 9bit

PDF İndir
DEMO CODE
Sorguya ekle
Önceki Listeye geri dön Sonraki

ÇIZIM

Chip on Glass LCD Module 240x128 with PCB - WO240128B2

AYRINTILAR

Arayüz Pin Fonksiyonlari

Pin No. Sembol TANIM
1 VDD Power supply
2 NC No connection
3 VSS Ground
4 CSB Chip select input pin
CSB=“L”: This chip is selected and the MPU interface is active
CSB=“H”: This chip is not selected and the MPU interface is disabled
(D[7:0] are high impedance)
5 RSTB Reset input pin. When RSTB is “L”, internal initialization procedure is executed
6 /RD(E) Read / Write execution control pin. (This pin is only used in parallelinterface)
MPU Type ERD Description
6800-series E Read/Write control input pin.
R/W = "H": When E is "H", data bus is in output status.
R/W = "L": The data are latched at the falling edge of the E signal.
8080-series /RD Read enable input pin.
When /RD is "L", data bus is in out put status.
This pin is not used in serial interfaces and should be connected to VDD1
7~14 D7~D0 The bi-directional data bus of the MPU interface. When CSB is “H”, they are high impedance
If using serial interface:
D0 is the SDA signal in 4-Line & 3-Line interface
D1 is the A0 signal in 4-Line interface
15 /WR/(R/W) Read / Write execution control pin. (This pin is only used in parallel interface)
MPU Type ERD Description
6800-series R/W Read/Write control input pin.
R/W = "H": read
R/W = "L": write
8080-series /WR Read enable input pin.
The data are latched at the rising edge of the /WR signal.
This pin is not used in serial interfaces and should be connected to VDD1
16 A0(SCL) The function of this pin is different in parallel and serial interface
In parallel interface: A0 is register selection input
A0 = "H": inputs on data bus are display data
A0 = "L": inputs on data bus are command
In serial interface: this pad will be used as SCL (serial-clock) input
17 A LED+
18 K LED-

Mekanik Veri

Kalem Standart Deger Birim
Nokta Matrisi 240 × 128 －
Modül ölçüleri 140.0 × 84.0 × 9.7 mm
Görüntüleme alanı 114.0 × 64.0 mm
Aktif alan 107.98 × 57.58 mm
Nokta boyutu 0.43 × 0.43 mm
Nokta sıklığı 0.45 × 0.45 mm
Sürme Methodu 1/128 Duty，1/12 Bias
Backlight Tipi LED
IC ST7586S

Maksimum Değerler

Kalem Sembol Minumum Deger Tipik Deger Maksimum Deger Birim
Çalışma Sıcaklığı TOP -20 － +70 ℃
Saklama Sıcaklığı TST -30 － +80 ℃
Digital Power Supply Voltage VDDI -0.3 － 3.6 V
Analog Power supply voltage VDDA -0.3 － 3.6 V
LCD Power supply voltage V0-XV0 -0.3 － 19 V
LCD Power supply voltage VG -0.3 － 5.5 V

Elektronik Özellikleri

Kalem Sembol Durum Minumum Deger Tipik Deger Maksimum Deger Birim
Supply Voltage For Logic VDD-VSS － 3.0 3.3 3.6 V
Supply Voltage For LCM VOP Ta=-20℃
Ta=25℃
Ta=+70℃		 －
14.8
－		 －
15.0
－		 －
15.2
－		 V
V
V
Input High Volt. VIH － 0.7VDD － VDD V
Input Low Volt. VIL － VSS － 0.3 VDD V
Output High Volt. VOH － 0.8 VDD － VDD V
Output Low Volt. VOL － VSS － 0.2VDD V
Supply Current IDD VDD=3.3V － 2.0 4.0 mA

Search keyword: 240x128 lcd, 240 x 128 lcd, lcd 240x128, lcd 240 x 128
go top
close