Model No. WF18FTLAADNN0

►Tamanho: 1,77 polegadas
►Resolução : 128x160 pontos
►Direção de exibição: 6H
►Interface: MCU
►Controlador ST7735S integrado
►Placa de controle: Não
►Brilho(cd/m²): 500
►Quadro com furo passante: Não
►Tela de Toque: Não

PDF DOWNLOAD

DEMO CODE

ADD TO INQUIRY

PREV. BACK to LIST NEXT

DRAWING

1.77 inch 128x160 TFT ST7735 IC Display - WF18FTLAADNN0 - Winstar

SPECIFICATIONS

Interface

Pin	Symbol	I/O	Function
1	VLED-	P	Back light cathode
2	VLED	P	Back light anode
3	IM0	I	- MCU Parallel Interface Type Selection -If Not Used, Please Fix this Pin at VDDI or DGND Level.
4	IM1	I
5	IM2	I	MCU Parallel Interface Bus and Serial Interface select IM2='1', Parallel Interface IM2='0', Serial Interface
6	RESET	P	Reset signal
7-12	NC	-	No Connect
13-28	DB15-DB0(SPI_SDA)	I/O	DB15:0] are used as MCU parallel interface data bus. -DBis the serial input/output signal in serial interface mode. -In serial interface, DB15:1] are not used and should be fixed at VDDI or DGND level.
29	NC	-	No Connect
30	RD	I	Read Enable in 8080 MCU Parallel Interface. -If not used, please fix this pin at VDDI or DGND level.
31	WR	I	Serial clock -Write Enable in MCU Parallel Interface. -If not used, please fix this pin at VDDI or DGND level.
32	D/C(SPI_SCL)	I	-Display data/command Selection Pin in MCU Interface. -D/CX='1': Display Data or Parameter. -D/CX='0': Command Data. -In Serial Interface, this is used as SCL. -If not used, please fix this pin at VDDI or DGND level.
33	CS(SPI_CS)	I	Chip enable
34	IOVCC	P	Interface Operation Voltage
35	VCI	P	Analog Supply Voltage
36	GND	P	Ground
37-40	NC	-	No Connect

General Specifications

Item	Dimension	Unit
Size	1.77	inch
Dot Matrix	128 × RGB × 160(TFT)	dots
Module dimension	34.0(W) × 45.83(H) × 2.65(D)	mm
Active area	28.03 × 35.04	mm
Dot pitch	0.073 × 0.219	mm
LCD type	TFT, Normally White, Transmissive
View Direction	6 o'clock
Gray Scale Inversion Direction	12 o'clock
Aspect Ratio	Portrait
IC	ST7735S
Backlight Type	LED, Normally White
Touch Panel	Without Touch Panel
Surface	Anti-Glare