N° de modèle WF52QSZBSDBN0
►Dimension 5.2 pouces
►Résolution d’écra: 480 x 128 points
►Vue préférentielle 6h
►Interface: 8080, MPU
►Contrôleur intégré: SSD1963
►Carte de contrôle: Yes
►Luminosité (Cd/m²): 850
►Cadre de maintien avec points de fixation: Yes
►Dalle tactile: Sans dalle tactile
►O-Film : Yes
DESSIN

SPÉCIFICATIONS
Interface
LCM PIN Definition (CON4)| Pin | Symbole | Function |
|---|---|---|
| 1 | GND | System round pin of the IC. Connect to system ground. |
| 2 | VDD | Power Supply : +3.3V |
| 3 | BL_E | Backlight control signal , H: On \ L: Off |
| 4 | D/C | Data/Command select |
| 5 | WR | Write strobe signal |
| 6 | RD | Read strobe signal |
| 7~14 | DB0~DB7 | Data bus |
| 15~22 | DB8~DB15 | Data bus (When select 8bits mode, this pin is NC) |
| 23~24 | NC | No connect |
| 25 | CS | Chip select |
| 26 | RESET | Hardware reset |
| 27 | LR | Right /Left selection; Default R/L is Pull High |
| 28 | UD | Up/down selection; Default U/D is Pull High |
| 29~32 | NC | No connection |
| 33~34 | VLED- | VLED- for B/L LED inverter (GND) |
| 35~36 | VLED+ | VLED+ for B/L LED inverter (+5V) |
LCM PIN Definition (CON1)
| Pin | Symbole | Function |
|---|---|---|
| 1 | NC(FG) | No connect (Frame Grand) |
| 2 | GND | System round pin of the IC. Connect to system ground. |
| 3 | VDD | Power Supply : +3.3V |
| 4 | BLE | Backlight control signal , H: On \ L: Off |
| 5 | WR | Write strobe signal |
| 6 | RD | Read strobe signal |
| 7 | CS | Chip select |
| 8 | D/C | Data/Command select |
| 9 | NC | No connect |
| 10 | RESET | Hardware reset |
| 11~18 | DB0~DB7 | Data bus |
| 19~20 | NC | No connect |
| 21 | VLED+ | VLED+ for B/L LED inverter (+5V) |
| 22 | VLED- | VLED- for B/L LED inverter (GND) |
| 23~25 | NC | No connect |
| 26 | GND | Hardware reset |
Spécifications générales
| Article | Dimensions | Unité |
|---|---|---|
| Dimension | 5.2 | pouce |
| Matrice de points | 480 × RGB × 128 | points |
| Dimensions du module | 180.0 × 65.0 × 8.8 | mm |
| Zone active | 127.152 × 33.9072 | mm |
| Pas des points | 0.0883 × 0.2649 | mm |
| Type de LCD | TFT, Blanc, Transmissif | |
| Vue préférentielle | 6 o'clock | |
| Inversion de sens de l'échelle de gris | 12 o'clock | |
| Rapport d'aspect | Bar Type | |
| Type de rétroéclairage | LED, Blanc | |
| CI pilote | SSD1963 | |
| Interface | Digital 8080 family MPU 8bit/16bit | |
| Avec/sans dalle tactile | Sans dalle tactile | |
| Surface | Reflets | |
Valeurs nominales maximales absolues
| Article | Symbole | Min | Typ | Max | Unité |
|---|---|---|---|---|---|
| Température de fonctionnement | TOP | -20 | - | +70 | ℃ |
| Température de stockage | TST | -30 | - | +80 | ℃ |
Caractéristiques électroniques
| Article | Symbole | État | Min | Typ | Max | Unité |
|---|---|---|---|---|---|---|
| Supply Voltage For LCM | VDD | - | 3.0 | 3.1 | 3.3 | V |
| Supply Current For LCM | IDD | - | - | 200 | - | mA |
