N° de modèle WF35TTNACDNN0
►Dimension 3.5 pouces
►Résolution d’écran: 320 x 240 points
►Vue préférentielle 12h
►Interface : RGB
►IC Part No.: --
►Carte de contrôle: NON
►Luminosité (Cd/m²): 420
►Holding frame with fixing points: NON
►Dalle tactile: NON
►Température d’utilisation: -30~+80℃
DESSIN
SPÉCIFICATIONS
Interface
LCM PIN Definition
| Pin | Symbole | Fonction |
|---|---|---|
| 1 | LED- | Power for LED backlight cathode |
| 2 | LED- | Power for LED backlight cathode |
| 3 | LED+ | Power for LED backlight anode |
| 4 | LED+ | Power for LED backlight anode |
| 5 | NC | No connect |
| 6 | NC | No connect |
| 7 | NC | No connect |
| 8 | /RESET | Hardware reset |
| 9 | CSB | Chip select pin of serial interface |
| 10 | SCL | Clock pin of serial interface |
| 11 | SDA | Data input pin in serial mode |
| 12 | B0 | Blue Data bus0 |
| 13 | B1 | Blue Data bus1 |
| 14 | B2 | Blue Data bus2 |
| 15 | B3 | Blue Data bus3 |
| 16 | B4 | Blue Data bus4 |
| 17 | B5 | Blue Data bus5 |
| 18 | B6 | Blue Data bus6 |
| 19 | B7 | Blue Data bus7 |
| 20 | G0 | Green Data bus0 |
| 21 | G1 | Green Data bus1 |
| 22 | G2 | Green Data bus2 |
| 23 | G3 | Green Data bus3 |
| 24 | G4 | Green Data bus4 |
| 25 | G5 | Green Data bus5 |
| 26 | G6 | Green Data bus6 |
| 27 | G7 | Green Data bus7 |
| 28 | R0 | Red Data bus0 / DX0 |
| 29 | R1 | Red Data bus1 / DX1 |
| 30 | R2 | Red Data bus2 / DX2 |
| 31 | R3 | Red Data bus3 / DX3 |
| 32 | R4 | Red Data bus4 / DX4 |
| 33 | R5 | Red Data bus5 / DX5 |
| 34 | R6 | Red Data bus6 / DX6 |
| 35 | R7 | Red Data bus7 / DX7 |
| 36 | HSYNC | Line synchronization signal (Fix to GND when not in use) |
| 37 | VSYNC | Frame synchronization signal (Fix to GND when not in use) |
| 38 | DCLK | Dot-clock signal and oscillator source |
| 39 | NC | No connect |
| 40 | NC | No connect |
| 41 | VCC | Power Supply |
| 42 | VCC | Power Supply |
| 43 | NC | No connect |
| 44 | NC | No connect |
| 45 | NC | No connect |
| 46 | NC | No connect |
| 47 | NC | No connect |
| 48 | IF2 | Input pin to select input interface mode |
| 49 | IF1 | Input pin to select input interface mode |
| 50 | NC | No connect |
| 51 | NC | No connect |
| 52 | DE | Display enable pin from controller. Internal pull high Connect to VCCIO or floating if not used (Fix to GND when not in use) |
| 53 | GND | Ground. |
| 54 | GND | Ground. |
Spécifications générales
| Article | Dimensions | Unité |
|---|---|---|
| Dimension | 3.5 | pouce |
| Matrice de points | 320 × RGB × 240(TFT) | points |
| Dimensions du module | 76.9(W) × 63.9(H) × 3.1(D) | mm |
| Zone active | 70.08 × 52.56 | mm |
| Pas des points | 0.073 × 0.219 | mm |
| Type de LCD | TFT, Blanc, Transmissif | |
| Vue préférentielle | 12 o'clock | |
| Inversion de sens de l'échelle de gris | 6 o'clock | |
| Type de rétroéclairage | LED, Blanc | |
| Avec/sans dalle tactile | Sans dalle tactile | |
| Rapport d'aspect | 4:3 | |
| Surface | Reflets | |
Valeurs nominales maximales absolues
| Article | Symbole | Valeur min | Valeur min | Valeur max | Unité |
|---|---|---|---|---|---|
| Température de fonctionnement | TOP | -30 | － | +80 | ℃ |
| Température de stockage | TST | -30 | － | +80 | ℃ |
Caractéristiques électroniques
| Article | Symbole | État | Valeur min | Valeur min | Valeur max | Unité |
|---|---|---|---|---|---|---|
| Supply Voltage For LCM | Vcc | - | 3.0 | 3.3 | 3.6 | V |
| Supply Current For LCM | Icc | - | - | 8.6 | 15 | mA |
